top of page
Safety

Safety Guildline

To ensure safe and effective use of Perfect Crack demolition powder, users must strictly follow all usage instructions and safety measures. Always wear protective gear, including safety goggles and gloves, during handling and application. The powder should only be mixed with water at the time of use and must be kept away from moisture beforehand. Avoid direct contact with skin or eyes, and in case of accidental exposure, rinse thoroughly with water and seek medical attention if necessary. Ensure proper ventilation during use and maintain a safe distance after pouring the mixture into drilled holes, as blowouts may occur.

 

The product must be stored in a cool, dry place, out of reach of children and unauthorized personnel. Improper use can result in injury or damage, and Perfect Crack is not responsible for any accidents caused by failure to follow these safety guidelines.

CRACKING POWDER

Non-Explosive &
Vibration-Free

Break rocks and concrete safely without the risks of blasting, shockwaves, or vibrations.

Customizable Grades

Specially formulated powders tailored for different climates, stone types, and strength levels.

Perfect Crack

Safe for Urban & Confined Spaces

Perfect for use near buildings or populated areas where noise and debris must be avoided.

Eco-Friendly Operation

Produces no dust, fumes, or environmental hazards, making it safe for people and nature.

CRACK POWDER

What is Cracking Powder ?

Concrete-Demolition-Crack-Repairs.jpg

Stone Cracking Powder is a non-explosive demolition agent used to break rocks, stones, and concrete safely and silently. When mixed with water and poured into drilled holes, it expands slowly with immense pressure, creating natural cracks without the use of explosives. It’s ideal for areas where blasting is restricted, dangerous, or impractical.

1 (1).png
DRILLING
  • Drill holes into the rock, stone, or concrete that needs to be broken.

  • Distance between holes: 7–12 inches

  • Hole diameter: 35 mm

  • Hole depth: 95% of the desired break length (minimum 1.5 ft)

  • Ensure there is free space on at least one side so the material can expand and crack safely.

2 (1).png
MIXING
  • Mix the provided cracking powder with clean water just before use.

  • Stir well to make a smooth, watery mixture.

3 (1).png
POURING
  • Pour the prepared mixture into the drilled holes from Step 1.

  • Allow time for the chemical expansion to develop cracks silently and safely.

bottom of page